移動式升降平臺http://www.v7ftun.cn/升高以后會出現搖晃，俗稱擺幅，這個是正常的現象。不同的升降平臺高空作業隨著高度的不同，搖擺的幅度也是不相同的。相同條件下，固定式升降平臺最穩定，其次是固定式剪叉式升降機，再就是各類移動式升降機與車載升降機了，出現搖擺很正常，但是搖擺幅度也是有限制的。
Mobile lifting platform will be increased after shaking, commonly known as swing, this is a normal phenomenon. Different lifting platform with the height of the operation of different heights, the swing is not the same amplitude. Under the same conditions, fixed lifting platform is the most stable, followed by fixed shear fork lift, and all kinds of mobile lift and vehicle lifts, swing is normal, but the swing amplitude is also limited.  

移動式升降平臺在8米有以上作業就基本屬于中高空了，這個高度以上設備本身由于自身的重量開始出現不同幅度的晃動，晃動的幅度取決于載重物體的重量，以及升空的高度，在高空作業的強度等因素。為了人身以及設備安全，承載的重量不能高于最大承載量，升高高度能最好控制在適合工作的高度，能10米工作，就不要升到11米。
Mobile elevating platform has 8 meters above belong to the altitude, the height above the device itself due to its own weight began to appear different magnitude of shaking, shaking amplitude depending on the weight of the load objects, and lift off height, intensity and other factors in work high above the ground. For personal and equipment safety,bearing the weight can not be higher than the maximum carrying capacity, increase the height of the best control in the suitable height, can work 10 meters, do not rise to 11 meters. 

移動式升降平臺http://www.v7ftun.cn/作業時候強度需要注意，當遇到強度十分大的工作時候，最好加強四根支撐腿，同時最好用繩索固定作業平臺四角，加強穩定性，避免出現因為過度搖擺造成各種升降平臺事故。
Mobile elevating work platform when the strength of the need to pay attention to, when the intensity of work is very large, it is best to strengthen the four supporting legs. It is better to use the four corners of the rope fixed operation platform, strengthen the stability, to avoid because of excessive swing caused by a variety of lifting platform accident.